{"product_id":"autoglym-polar-snow-foam-kit","title":"Autoglym Polar \"Snow Foam\" Kit","description":"\u003ch2\u003eAutoglym Polar Kit without Snow Foam Lance\u003c\/h2\u003e\n\u003cp\u003eThree products, three different foam thicknesses and three unique functions that get your car showroom-ready. These products are specially developed for use with Autoglym's Polar Blaster and your pressure washer, making it quick and effective to cover your car in foam. On top of that, Polar Seal provides a long-lasting shine.\u003c\/p\u003e\n\u003ch3\u003eAutoglym Polar Blast 2.5 litres - Snow Foam Pre-Wash\u003c\/h3\u003e\n\u003cp\u003eAutoglym Polar Blast can make it look as though you are covering your car in a blanket of snow. But beneath the surface, this thick, clinging foam works to loosen dirt and heavy contamination – entirely without damaging the paintwork or requiring physical contact. Perfect preparation for the subsequent Autoglym Polar Wash.\u003c\/p\u003e\n\u003ch4\u003eConcentrated Polar power\u003c\/h4\u003e\n\u003cp\u003eAlthough you can mix it stronger, Autoglym recommends a dilution of 1 part Polar Blast to 5 parts water. That produces a foam that works wonders in just three minutes – so one bottle goes a long way.\u003c\/p\u003e\n\u003ch4\u003ePowerful foaming\u003c\/h4\u003e\n\u003cp\u003eGet your Polar Blaster ready. For the best foam level, we recommend using our snow foam lance – the Autoglym Polar Blaster – together with a pressure washer to apply Polar Blast. This ensures a denser foam layer and better cleaning with maximum cling.\u003c\/p\u003e\n\u003ch4\u003epH-neutral formula\u003c\/h4\u003e\n\u003cp\u003eThis gentle pre-wash can be used on all of the car's surfaces. It removes neither previously applied wax nor sealant, saving you time and money. You get an impressive foam experience and an easier car wash – right from the first use.\u003c\/p\u003e\n\u003ch4\u003eHow to use\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the car's bodywork and wheels are cool and not in direct sunlight.\u003c\/li\u003e\n\u003cli\u003ePolar Blast can be diluted to your preferred foam thickness. Start with 100 ml of product to 500 ml of water in the foam bottle. Adjust the foam gun's settings to increase or decrease the amount of foam.\u003c\/li\u003e\n\u003cli\u003eSpray Polar Blast onto the car, starting at the bottom and working upwards so all exterior surfaces are covered – including windows and wheels.\u003c\/li\u003e\n\u003cli\u003eLeave Polar Blast to work for up to 10 minutes to loosen dirt, but do not let it dry out.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly from the bottom up.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFollow up with Polar Wash for a deeper clean, and finish with Polar Seal for a protective, water-repellent coating.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eAutoglym Polar Wash 2.5 litres - Shampoo for Snow Foam Lance\u003c\/h3\u003e\n\u003cp\u003eYou have finished the pre-wash – now it is time for the next stage. Autoglym's Polar Wash, with its powerful foaming action, carries on where Autoglym Polar Blast left off – breaking down traffic film as you work the foam in. This shampoo makes removing dirt quick and easy, so you can move swiftly on to the final stage – Polar Seal.\u003c\/p\u003e\n\u003ch4\u003e50:50 concentrate\u003c\/h4\u003e\n\u003cp\u003eTo cover an average-sized car, mix 250 ml of Polar Wash with 250 ml of water. That provides plenty of foam for a thorough wash. Get your Polar Blaster ready, mix your solution and pull the trigger.\u003c\/p\u003e\n\u003ch4\u003eVersatile and effective\u003c\/h4\u003e\n\u003cp\u003eThis shampoo is safe to use on all of the car's surfaces and effectively removes dirt without damaging previously applied wax or sealant layers. That saves you time, so you can spend more of it enjoying your car – on a drive, for example.\u003c\/p\u003e\n\u003ch4\u003eGentle cleaning\u003c\/h4\u003e\n\u003cp\u003eAutoglym Polar Wash produces an extra-thick layer of foam, giving you plenty of time to work your way around the car before rinsing. Use a damp wash mitt to wash the surfaces.\u003c\/p\u003e\n\u003ch4\u003eHow to use\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the car's bodywork and wheels are cool and not in direct sunlight.\u003c\/li\u003e\n\u003cli\u003eStart with a pre-wash using Autoglym Polar Blast to loosen dirt. If you skip this stage, first rinse the car thoroughly with water to remove coarse contamination.\u003c\/li\u003e\n\u003cli\u003ePolar Wash can be diluted at different ratios depending on how dense you want the foam. Never use a mix stronger than 50:50, though. Adjust the foam gun's settings for more or less foam. 250 ml of ready-mixed solution is usually enough for an average car.\u003c\/li\u003e\n\u003cli\u003eSpray Polar Wash onto the car, starting at the bottom and working upwards so all exterior surfaces are covered – including windows and wheels.\u003c\/li\u003e\n\u003cli\u003eThe foam loosens dirt from all surfaces. For the most thorough result, work the foam in with a sponge or wash mitt.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly from the bottom up, then dry the car.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePolar Wash is not suitable for convertibles with fabric roofs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFollow up with Polar Seal for a protective, water-repellent coating.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAutoglym Polar Seal 1 litre - Wax Coating\u003c\/h3\u003e\n\u003cp\u003eThe third and final stage in Autoglym's three-step Polar process – Polar Seal. A lightly foaming sealant that quickly repels water and dirt, protects the paintwork and makes it shine like new. All to give your car's exterior the best possible finish – one that lasts.\u003c\/p\u003e\n\u003ch4\u003eQuick application\u003c\/h4\u003e\n\u003cp\u003eNo polishing required. Simply mix 40 ml of Polar Seal with 200 ml of water, spray it onto your clean, wet car with a snow foam lance and rinse off immediately with a pressure washer. Then dry the car with a drying towel.\u003c\/p\u003e\n\u003ch4\u003eWater-repellent sealing\u003c\/h4\u003e\n\u003cp\u003eThis durable, super-hydrophobic sealant forms a 'shield' on the car's surface. As well as repelling water and dirt, Polar Seal reduces drying time and protects the paintwork, making future washes easier.\u003c\/p\u003e\n\u003ch4\u003eHigh-gloss finish\u003c\/h4\u003e\n\u003cp\u003ePolar Seal delivers a high-gloss finish with minimal effort. You get both protection and a beautiful shine, while the durable coating makes maintenance quicker and easier than ever.\u003c\/p\u003e\n\u003ch4\u003eHow to use\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the car's bodywork and wheels are cool and not in direct sunlight.\u003c\/li\u003e\n\u003cli\u003eStart with a pre-wash such as Polar Blast to gently loosen dirt, then continue with Polar Wash to remove any remaining dirt from the car's paintwork.\u003c\/li\u003e\n\u003cli\u003eUse only a small amount of Polar Seal. Pour no more than 40 ml (four capfuls) into your foam bottle and add at least 200 ml of water. This mix is enough to cover the whole car. Using more than 40 ml may impair the result.\u003c\/li\u003e\n\u003cli\u003eSpray Polar Seal onto the clean, wet car so all exterior surfaces are covered – but avoid spraying directly onto the windscreen.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly and dry the car to reveal a high-gloss finish with a hydrophobic coating. Dry the car with a cloth – do not let it air dry, as this can leave limescale spots.\u003c\/li\u003e\n\u003cli\u003eUse Autoglym Fast Glass to clean the windscreen and wiper blades to avoid smearing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt is recommended to use Polar Seal no more than once a month.\u003c\/li\u003e\n\u003cli\u003eNot suitable for fabric convertible roofs or motorcycles.\u003c\/li\u003e\n\u003cli\u003eDo not store the diluted mixture. Rinse both the foam bottle and the pressure washer nozzle after use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAutoglym Polar Blaster Snow Foam Lance \u003c\/h3\u003e\n\u003cp\u003eThe Polar Blaster is the perfect companion to the rest of Autoglym's Polar range. It creates a thick, clinging foam with Polar Blast, an optimised foam thickness for an effective deep clean with Polar Wash, and the perfect consistency for quick application of Polar Seal. Autoglym's Polar Blaster turns your pressure washer into the ultimate car washing tool.\u003c\/p\u003e\n\u003ch4\u003eWide-neck bottle\u003c\/h4\u003e\n\u003cp\u003eAutoglym has thought of everything to make life easy for you – right down to the small details. For instance, the wide-neck bottle is designed so you can easily pour in the correct amount of diluted product without spilling a drop.\u003c\/p\u003e\n\u003ch4\u003eAdjustable spray pattern\u003c\/h4\u003e\n\u003cp\u003eTo ensure full coverage and the correct dwell time, the Polar Blaster can be adjusted quickly. Simply start your pressure washer and turn the nozzle guard anti-clockwise until the spray pattern is as you want it.\u003c\/p\u003e\n\u003ch4\u003eExcellent foaming performance\u003c\/h4\u003e\n\u003cp\u003eThe Polar Blaster delivers the perfect foam thickness – whether you are pre-washing, washing or sealing. To ensure the best foam quality every time, simply turn the mixing dial on top clockwise until the desired amount of foam is achieved.\u003c\/p\u003e\n\u003ch3\u003eHow to use:\u003c\/h3\u003e\n\u003ch4\u003eAssembling the Polar Blaster:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eAttach the transparent tube to the brass nozzle on the underside of the foam gun head.\u003c\/li\u003e\n\u003cli\u003eAttach the black end of the connector to the trigger handle of your pressure washer.\u003c\/li\u003e\n\u003cli\u003ePull back the spring-loaded brass coupling on the connector and connect it to the silver nozzle on the foam gun head.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eUsing the Polar Blaster:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eDilute the product according to the recommendations on the side of the Polar bottle.\u003c\/li\u003e\n\u003cli\u003eScrew the foam gun head onto the Polar bottle and connect the Polar Blaster to your pressure washer.\u003c\/li\u003e\n\u003cli\u003ePoint the nozzle at the ground and pull the trigger to let the Polar product run through the system.\u003c\/li\u003e\n\u003cli\u003eTurn the dial to adjust the foam level, and turn the nozzle to change the spray pattern.\u003c\/li\u003e\n\u003cli\u003eOnce the foam comes out at the desired consistency, start applying the product to the car according to the instructions for each individual Polar product.\u003c\/li\u003e\n\u003cli\u003eRinse the bottle with clean water after using each product.\u003c\/li\u003e\n\u003cli\u003eAlso flush the Polar Blaster through with clean water once you have finished applying all the products.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/of9-5V6kHW4?si=BZg3qhme4GC6UoLy\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e","brand":"Autoglym","offers":[{"title":"Default Title","offer_id":45930028859436,"sku":"76 SA101","price":132.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/0133\/4828\/files\/76-SA101_NEW_3899b673-6f60-46f9-9dad-f20efb956410.jpg?v=1786005642","url":"https:\/\/green-going.eu\/en-de\/products\/autoglym-polar-snow-foam-kit","provider":"GreenGoing","version":"1.0","type":"link"}