Soft99 Glaco Mirror Coat Zero 40ml

Glaco Mirror Coat Zero – Coating for wing mirrors, reversing cameras and more

Glaco Mirror Coat Zero creates an invisible, ultra-hydrophobic coating that prevents water droplets from settling on the surface of your car's mirrors. Rain and droplets run straight off the mirrors, even when the car is stationary.

The product can also be used on reversing cameras. Apply it to the camera lens to stop water and dirt from sticking to the glass.

Don't throw away the cardboard backing that forms part of the box! Bend it into a semicircle and place it in the gap between the mirror and its housing. This makes it easy to apply the product without the risk of spraying other parts of the car.

Please note! The product is not suitable for use on windscreens or other glass surfaces. The coating is sensitive to touch and strong water spray. Touching, wiping or hand-washing the mirrors will remove the coating. Likewise, if the product has been applied to the wing mirrors, they should not be heated, as this will remove the coating.

Contents: 40 ml. Enough for 10 applications on 10x15 cm mirrors.

With Glaco you see more and react faster

Water settles on unprotected glass and distorts the light. Your visibility is reduced, blurred or disappears altogether! The solution? Glaco. How does it work? The invisible coating shapes water into perfectly round droplets and repels them. The rest of the work is done by the airflow, which blows the droplets off the glass and leaves the mirror clear, even in the heaviest rain.

How to use:

1. Prepare the mirror surfaces by washing them thoroughly with a pH-neutral shampoo, then drying and decontaminating the surface using clay, cleaners or other products of this type. Glaco products achieve the best results if the glass is cleaned using Glass Compound Z or Glaco cleaners.
2. Spray the product evenly from a distance of approximately 15 cm from the mirror. We recommend masking the mirror housing with a cardboard shield to avoid spraying other parts of the vehicle.
   
   
3. Leave to dry for 1.5 hours without touching the protected surface.