SONAX Xtreme Foam Lance 1L

SONAX Foam Lance – bottle with dosing gauge and spray nozzle. For mounting on a pressure washer. The foam lance produces a thick foam that clings to the surface and boosts the washing effect. – Car washing made easier and more fun!

Washing your car is now more fun and easier than ever. The SONAX foam lance produces a thick foam, almost like shaving foam, when used with SONAX XTREME Rich Foam Shampoo or EXO No Brush

The advantage of foam is that the product stays on the surface far longer and dissolves dirt more effectively. For a maintenance wash of a well-waxed, lightly soiled car, it is often enough to apply a layer of foam and rinse off at high pressure. If the car is very dirty, the foam helps protect the car from sponge scratches by reducing friction. The foam lance is used together with a pressure washer and mounts directly onto the pressure washer's lance using an adapter – choose the adapter that fits your pressure washer. PLEASE NOTE: ADAPTER NOT INCLUDED!

IMPORTANT: Maximum pressure: 200 bar. Maximum water temperature: 60 ° C
Suitable for pressure washers with a water flow of 6-15 litres per minute and 135-180 bar of pressure. When washing at higher/lower pressure, the nozzle inside the foam lance can be replaced and adapted to a different pressure. The mixing ratio will vary depending on which pressure washer you have and the pressure it delivers. Do not use aromatic oil-based products or high concentrations of strongly alkaline or acid-based substances (below pH 4 or above pH 11) in the foam lance

FITTING: Apply PTFE tape to the brass threads before fitting.

DIRECTIONS FOR USE: First rinse coarse dirt off the car with the pressure washer. Fill the Foam Lance bottle with 90 cl of water and then 10 cl of SONAX XTREME Rich Foam Shampoo, or 75 cl of water and then 25 cl of EXO No Brush. Adjust the mixing-ratio screw to the strongest possible mixture (fully tightened clockwise). Rinse coarse dirt off the car and, if necessary, use a degreaser first depending on the level of soiling and the season. Fit the Foam Lance and apply an even layer of foam over the entire car, leaving it to work for a few minutes.

PLEASE NOTE! Do not let the foam dry on the paintwork! Depending on the level of soiling, wash the car with a sponge/wash mitt or simply rinse off at high pressure. Rinse the foam lance through with clean water after use, and do not store strong mixtures in the foam lance bottle for extended periods.