Autoglym Polar "Snow Foam" Kit

Autoglym Polar Kit without Snow Foam Lance

Three products, three different foam thicknesses and three unique functions that get your car showroom-ready. These products are specially developed for use with Autoglym's Polar Blaster and your pressure washer, making it quick and effective to cover your car in foam. On top of that, Polar Seal provides a long-lasting shine.

Autoglym Polar Blast 2.5 litres - Snow Foam Pre-Wash

Autoglym Polar Blast can make it look as though you are covering your car in a blanket of snow. But beneath the surface, this thick, clinging foam works to loosen dirt and heavy contamination – entirely without damaging the paintwork or requiring physical contact. Perfect preparation for the subsequent Autoglym Polar Wash.

Concentrated Polar power

Although you can mix it stronger, Autoglym recommends a dilution of 1 part Polar Blast to 5 parts water. That produces a foam that works wonders in just three minutes – so one bottle goes a long way.

Powerful foaming

Get your Polar Blaster ready. For the best foam level, we recommend using our snow foam lance – the Autoglym Polar Blaster – together with a pressure washer to apply Polar Blast. This ensures a denser foam layer and better cleaning with maximum cling.

pH-neutral formula

This gentle pre-wash can be used on all of the car's surfaces. It removes neither previously applied wax nor sealant, saving you time and money. You get an impressive foam experience and an easier car wash – right from the first use.

How to use

1. Make sure the car's bodywork and wheels are cool and not in direct sunlight.
2. Polar Blast can be diluted to your preferred foam thickness. Start with 100 ml of product to 500 ml of water in the foam bottle. Adjust the foam gun's settings to increase or decrease the amount of foam.
3. Spray Polar Blast onto the car, starting at the bottom and working upwards so all exterior surfaces are covered – including windows and wheels.
4. Leave Polar Blast to work for up to 10 minutes to loosen dirt, but do not let it dry out.
5. Rinse thoroughly from the bottom up.

Tip: Follow up with Polar Wash for a deeper clean, and finish with Polar Seal for a protective, water-repellent coating.

Autoglym Polar Wash 2.5 litres - Shampoo for Snow Foam Lance

You have finished the pre-wash – now it is time for the next stage. Autoglym's Polar Wash, with its powerful foaming action, carries on where Autoglym Polar Blast left off – breaking down traffic film as you work the foam in. This shampoo makes removing dirt quick and easy, so you can move swiftly on to the final stage – Polar Seal.

50:50 concentrate

To cover an average-sized car, mix 250 ml of Polar Wash with 250 ml of water. That provides plenty of foam for a thorough wash. Get your Polar Blaster ready, mix your solution and pull the trigger.

Versatile and effective

This shampoo is safe to use on all of the car's surfaces and effectively removes dirt without damaging previously applied wax or sealant layers. That saves you time, so you can spend more of it enjoying your car – on a drive, for example.

Gentle cleaning

Autoglym Polar Wash produces an extra-thick layer of foam, giving you plenty of time to work your way around the car before rinsing. Use a damp wash mitt to wash the surfaces.

How to use

1. Make sure the car's bodywork and wheels are cool and not in direct sunlight.
2. Start with a pre-wash using Autoglym Polar Blast to loosen dirt. If you skip this stage, first rinse the car thoroughly with water to remove coarse contamination.
3. Polar Wash can be diluted at different ratios depending on how dense you want the foam. Never use a mix stronger than 50:50, though. Adjust the foam gun's settings for more or less foam. 250 ml of ready-mixed solution is usually enough for an average car.
4. Spray Polar Wash onto the car, starting at the bottom and working upwards so all exterior surfaces are covered – including windows and wheels.
5. The foam loosens dirt from all surfaces. For the most thorough result, work the foam in with a sponge or wash mitt.
6. Rinse thoroughly from the bottom up, then dry the car.

Note: Polar Wash is not suitable for convertibles with fabric roofs.

Tip: Follow up with Polar Seal for a protective, water-repellent coating.

Autoglym Polar Seal 1 litre - Wax Coating

The third and final stage in Autoglym's three-step Polar process – Polar Seal. A lightly foaming sealant that quickly repels water and dirt, protects the paintwork and makes it shine like new. All to give your car's exterior the best possible finish – one that lasts.

Quick application

No polishing required. Simply mix 40 ml of Polar Seal with 200 ml of water, spray it onto your clean, wet car with a snow foam lance and rinse off immediately with a pressure washer. Then dry the car with a drying towel.

Water-repellent sealing

This durable, super-hydrophobic sealant forms a 'shield' on the car's surface. As well as repelling water and dirt, Polar Seal reduces drying time and protects the paintwork, making future washes easier.

High-gloss finish

Polar Seal delivers a high-gloss finish with minimal effort. You get both protection and a beautiful shine, while the durable coating makes maintenance quicker and easier than ever.

How to use

1. Make sure the car's bodywork and wheels are cool and not in direct sunlight.
2. Start with a pre-wash such as Polar Blast to gently loosen dirt, then continue with Polar Wash to remove any remaining dirt from the car's paintwork.
3. Use only a small amount of Polar Seal. Pour no more than 40 ml (four capfuls) into your foam bottle and add at least 200 ml of water. This mix is enough to cover the whole car. Using more than 40 ml may impair the result.
4. Spray Polar Seal onto the clean, wet car so all exterior surfaces are covered – but avoid spraying directly onto the windscreen.
5. Rinse thoroughly and dry the car to reveal a high-gloss finish with a hydrophobic coating. Dry the car with a cloth – do not let it air dry, as this can leave limescale spots.
6. Use Autoglym Fast Glass to clean the windscreen and wiper blades to avoid smearing.

Note:

• It is recommended to use Polar Seal no more than once a month.
• Not suitable for fabric convertible roofs or motorcycles.
• Do not store the diluted mixture. Rinse both the foam bottle and the pressure washer nozzle after use.

Autoglym Polar Blaster Snow Foam Lance 

The Polar Blaster is the perfect companion to the rest of Autoglym's Polar range. It creates a thick, clinging foam with Polar Blast, an optimised foam thickness for an effective deep clean with Polar Wash, and the perfect consistency for quick application of Polar Seal. Autoglym's Polar Blaster turns your pressure washer into the ultimate car washing tool.

Wide-neck bottle

Autoglym has thought of everything to make life easy for you – right down to the small details. For instance, the wide-neck bottle is designed so you can easily pour in the correct amount of diluted product without spilling a drop.

Adjustable spray pattern

To ensure full coverage and the correct dwell time, the Polar Blaster can be adjusted quickly. Simply start your pressure washer and turn the nozzle guard anti-clockwise until the spray pattern is as you want it.

Excellent foaming performance

The Polar Blaster delivers the perfect foam thickness – whether you are pre-washing, washing or sealing. To ensure the best foam quality every time, simply turn the mixing dial on top clockwise until the desired amount of foam is achieved.

How to use:

Assembling the Polar Blaster:

1. Attach the transparent tube to the brass nozzle on the underside of the foam gun head.
2. Attach the black end of the connector to the trigger handle of your pressure washer.
3. Pull back the spring-loaded brass coupling on the connector and connect it to the silver nozzle on the foam gun head.

Using the Polar Blaster:

1. Dilute the product according to the recommendations on the side of the Polar bottle.
2. Screw the foam gun head onto the Polar bottle and connect the Polar Blaster to your pressure washer.
3. Point the nozzle at the ground and pull the trigger to let the Polar product run through the system.
4. Turn the dial to adjust the foam level, and turn the nozzle to change the spray pattern.
5. Once the foam comes out at the desired consistency, start applying the product to the car according to the instructions for each individual Polar product.
6. Rinse the bottle with clean water after using each product.
7. Also flush the Polar Blaster through with clean water once you have finished applying all the products.